Description
Form of release: liquid, ready-to-use foam cleaner in a bottle with a foaming dispenser.
Purpose: The product is intended for cleaning coated leather, leather substitutes, and vinyl coverings from sweat and grease stains, dust, and water-soluble spots. For professional use only!
Solution preparation:
The product is used without dilution. Use only in the original container!
Application:
Apply a small amount of the foam cleaner onto a soft sponge, spread it across the surface to be cleaned. If necessary, treat the surface with a soft brush or a brush for cleaning deeper reliefs. Wipe away the solution and dissolved dirt with a soft absorbent cloth. Repeat the procedure if necessary. After cleaning, apply a small amount of clean water using a spray bottle and wipe dry with a soft, clean white cloth. If there is a risk of water absorption into the seams or damage to the paint layer, remove the cleaning solution with a damp and dry cloth. Allow the surface to dry, usually 5-15 minutes, then apply and spread a leather conditioner according to its instructions.
To remove paint stains, ink, and ballpoint pen marks, it is recommended to use the product Dye Exit.
Attention! Some types of paint change color when wet!
Special precautions:
Conduct a preliminary inspection of the surface. If any damage is detected, document it carefully. Test the surface by applying a portion of Foam Skin Cleaner and leaving it for 10-15 minutes, then wipe with a soft cloth and rub slightly with your finger. If the paint peels off, rolls under your finger, or lifts when scratched with a nail at the test site, cleaning with this product is prohibited. Avoid pooling of the product and prolonged soaking of the coating in one spot. Use white absorbent cloths, as dye from colored cloths may transfer onto the surface.
Do not use on aniline leather, natural nubuck, or leather with a wax protective layer. Not recommended for use on perforated leather.
Safety precautions:
Conduct preliminary testing for colorfastness on the item to be cleaned. Keep out of reach of children, and do not use as food. In case of eye contact, rinse thoroughly with water and consult a doctor. If swallowed, rinse mouth, drink plenty of water, and seek medical advice immediately.
Foam Skin Cleaner storage conditions: Store in a tightly closed container at a temperature of 5°C to 35°C in an upright position, away from heat sources, open flames, direct sunlight, and atmospheric precipitation.
Ingredients: prepared water, complexing agent, anionic surfactants less than 5%, nonionic surfactants 5-15%, fragrance.
pH conc: 9.0 – 9.5
View all Wieberr leather cleaners and leather substitutes
View all Wieberr furniture and carpet cleaning solutions for special tasks
Pavlo –
Tested on my own car. Satisfactory result. Don’t forget to use conditioner after cleaning with Foam.
Ihor –
Effective leather cleaner! Bought a small bottle for testing, liked the product 👍🏻 Ordered a large 1-liter bottle! Highly recommend.