White Effect Powder – Alkaline-Free Oxygen Bleach

Description

Purpose: The product is designed for delicate, alkaline-free bleaching of cellulose, lignin-containing, protein, and other fibers, removing stains from certain plant dyes, enhancing other oxygen-based bleaching compositions, and adding to alkaline cleaning solutions to improve cleaning ability and delicate bleaching.

Solution Preparation

For complete bleaching and stain removal: Dissolve 1-3 scoops of powder (40 to 120 g) in two liters of room-temperature water.

For adjustment and enhancement during cleaning: Dissolve 1.5 scoops of powder (60 g) in 10 liters of ready-to-use cleaning solution with a pH of 7 or higher.

Application Caution! For professional use only!

White Effect Powder solutions may discolor various dyes, so thorough pre-testing for colorfastness is essential. Use with caution on colored items. Note that items appearing white may not always be truly white!

Complete bleaching and stain removal: Apply the White Effect Powder solution to the dry item (for stains, it can be applied to damp items, but the concentration should be increased to 120 g per 2 liters) in an amount sufficient to saturate the material, distribute along the fibers with a brush, wait for absorption, and visually observe the decolorizing effect.

After decolorization of the stain, depending on the material and situation, rinse the surface with clean water, a solution of Cotton Cleaner Powder, Pro Rinse, or proceed with general cleaning.

Precautions: Conduct pre-testing for colorfastness on the item to be cleaned. Avoid prolonged contact with marble surfaces.

Do not ingest. In case of ingestion, rinse mouth, drink plenty of water, and seek medical attention immediately. In case of eye contact, rinse with plenty of running water and seek medical advice.

Storage Conditions: Store in tightly closed original packaging at temperatures between 5°C and 40°C, in a place inaccessible to children, in an upright position, away from heat sources, open flames, sunlight, and precipitation.

Composition: Solution pH (1%): 3.6 (±1).